2019 - aluminum foil filler cost-saving method
29 09:18:22 sealing filler to follow when using manufacturers to provide product introduction, it can not only improve the production efficiency, and can reduce the incidence of failure, in order to save costs, introduce in this method.
1 need of water filling machine, aluminum foil, vent gas water separator.
2, need to add oil mist in the oil.
3 filling machine, aluminum foil filter and oil-water separator, use water bottles should be cleaned regularly, filter must be clean in mineral oil, and then use compressed air blowing off.
4, emissions after the change in time at the bottom of the piston and cylinder seal ring may wear.
5, and shall not be mixed with foreign body filler material, otherwise prohibited or attaint parts may result in discharge.
6, maintain smooth stainless steel body, do not use sharp, hard, sharp scraping the surface contamination, and if so, please use alcohol to clean.
7, when factories have good lubricating oil cylinder, not in a cylinder or add any lubricating oil.
8, aluminum foil, filling machine equipment check valve, stainless steel tee, material cylinder often unpick and wash.