Aluminum foil sealing filler filling quantity is not allowed or not the analysis of the causes of discharge
Aluminum foil sealing filler filling quantity are not allowed to be or not the analysis of the causes of discharge - 2019
09 13:29:57 aluminum foil sealing machine installation should note: 1, the machine when unpacking the case, first check whether random technical information is complete, the machine for damage in transit, in order to solve.
2, will feed components and discharging components according to the shape of this manual is installed and adjusted.
3, all lubricating points would be the new lubricating oil.
4, turn the machine by shaking the handle, check whether the aluminum foil sealing filler machine is running in the right direction,
In the face of motor spindle for counterclockwise)
Grounding must be protected by the machine.
Aluminum foil sealing filler filling quantity are not allowed to be or not cause analysis: 1, speed, throttle valve and the filling interval throttle valve is closed, throttle valve cannot be closed.
2 a foreign body inside, fast loading the 3-way valve, if yes, please arrange, fast loading the 3-way valve and filling head air is there inside the hose, if there is air, will be cut or eliminate air as far as possible.
3, check the sealing ring whether have damage, if any damage, replace the new one.
4, aluminum foil sealing filler filling nozzle valve core is there a card image or delay to open, such as a card, want to install the valve core from the good direction.
Such as delay to open, it is necessary to regulate the thin cylinder throttle valve.
5, fast loading within the 3-way valve tightening spiral spring up and down the stretch, stretch big check valve will be won't open.
6, the filling speed is too fast, throttle valve, adjust the filling speed by filling speed.
7, all card hoop, hose can be sealed, if you have to fix.
8, magnetic switch is not loose, lock after each adjusted the quantity.
If the aluminum foil sealing filler filling quantity is not allowed and not discharging the above introduction can help customers, so the machine production efficiency will have a qualitative improvement.