Aluminum foil sealing filler peristaltic pump and filling operation points for attention
Aluminum foil sealing filler peristaltic pump and note 2019 - filling operations
24 10:01:41 aluminum foil sealing filler to replace catheter to 1.
Will be dialing rod respectively to the two ends, after can remove briquetting and guide.
Remove button piece and put on the corresponding button.
The required specification of the catheter into the pump head, and adhere to the correct orientation.
From the beginning to press block and guide tightening.
In setting a rubber tube number set into the rubber tube number accordingly.
Peristaltic pump and filling operation points for attention and tip 1.
In the process of production, check the fluid volume in the tank, at any time and in a timely manner to adding liquid inside the tank.
If found in the process of filling equipment is not stable, check whether the catheter device in place.
If there is still a problem, the likelihood is a stepper motor or drive there was something wrong with the power supply, replace a new motor or power supply.
In the process of production, if there is abnormal action or phenomenon, immediately shut down, will be something wrong with cleaning the rear can use from the beginning.
Within the equipment appear broken bottles or other foreign material into the equipment, should be timely clean.
In equipment work, stop by hand or other items to touch of components or parts, to avoid personal injury accidents.