Beverage filling equipment, mechanical transmission, frequency conversion speed regulation

by:NEWLINE     2021-04-24
Beverage filling equipment Mechanical transmission Frequency conversion speed regulation 2019-01-02 15:12 Computer linear filling machine is a new product developed by our company. The whole machine adopts all stainless steel design, mechanical transmission, frequency conversion speed regulation, pneumatic positioning, photoelectric detection, programmable control by microcomputer (PLC), and a high-tech product integrating light, machine, electricity and gas. This machine is suitable for pouring liquor, wine, soy sauce vinegar, vegetable oil, syrup, mineral water and pesticide chemical liquids. Accurate measurement, no bubbles, no drips. The number of filling heads can be added according to user needs. Use, maintenance and installation: 1. Because this filling machine is an automated machine, the dimensions of easy-pull bottles, bottle pads, and bottle caps are required to be unified. 2. Before driving, you must use the crank handle to turn the machine to see if there is any abnormality in the rotation. 3. When adjusting the machine, use appropriate tools. It is strictly forbidden to use excessive tools or excessive force to disassemble parts to avoid damage to the machine parts or affect the performance of the machine. 4. After the machine is adjusted, be sure to tighten the loose screws, and use the shake handle to turn the machine to check whether the action meets the requirements before driving. 5. The machine must be kept clean. It is strictly forbidden to have oil stains, liquid chemicals or glass fragments on the machine to avoid damage to the machine. Therefore, it is necessary to: (1) Remove liquid chemicals or glass fragments in time during the production process of the machine. ⑵ Clean the surface of the machine once before the shift, and add clean lubricating oil to each activity department. ⑶ It should be scrubbed once a week, especially the places that are not easy to be cleaned in normal use or blown with compressed air. Disinfection and washing: 1. Loosen the upper and lower set screws, remove the liquid injection system for overall disinfection, or disassemble for disinfection and cleaning separately. 2. Put the liquid inlet pipe in the cleaning liquid and start the cleaning. 3. The 500ml model may have errors in actual filling, so the measuring cylinder should be accurate before the formal filling. 4. Needle tube for filling machine, standard 5ml or 10ml syringe for type 10, 20ml glass filler for type 20, and 100ml glass filler for type 100. Installation precautions 1. After the machine is unpacked, first check whether the accompanying technical data is complete and whether the machine is damaged during transportation, so as to solve it in time. 2. Install and adjust the feeding component and the discharging component according to the outline diagram in this manual. 3. Add new lubricating oil to each lubrication point. 4. Rotate the machine with the crank handle to check whether the machine is running in the correct direction (counterclockwise when facing the motor shaft), and the machine must be grounded.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: