Beverage machinery capping defect detection during the filling process

by:NEWLINE     2021-05-01
Detection of capping defects in the filling process of beverage machinery2018-03-30 10:29 In recent years, with technological progress, beverage inspection equipment has developed from simple sensors to complex imaging systems; from the early pure inspection equipment, Such as checking the existence of boxes and bottles, it will be further developed into liquid level detection, empty box and empty bottle detection. In addition to the above characteristics, there are other factors, such as appearance. Appearance is an important part that affects consumers' purchase of beverage machinery, and strict final inspection is also required. Especially for high-priced products. If the appearance quality does not match the intrinsic quality of the product, the brand value will soon be lost. During the production process, we found that if the position behind the capping machine is not adjusted properly, various defects will occur. For example, the type of bottle cap also determines the form of the defect. If a crown cap is used, pressure measurement is generally used to identify bottle cap defects. When inspecting plastic covers, the optical inspection system is more effective. By measuring the position of the bottle cap and the safety ring, the quality of the closure can be determined. Aluminum screw caps have more defect types. After a complicated rolling process, the possible defects did not affect the sealing at the time, but over time, this kind of bottle cap will appear to be not tightly sealed, causing the product to deteriorate in advance. In addition, when these bottle caps are opened, consumers may be harmed. Only when the bottle cap enters the capping machine correctly, the entire capping process is accurately adjusted, and the material of the cap and the container meets the requirements, the normal capping process can be realized. The typical deviations of each link in the capping process of beverage machinery lead to typical defects. The main manifestations are: partial cap, the so-called night cap; the cap is lightly rolled; the breaking point of each section is broken in advance; part of the safety ring is not When pressed, some areas are tilted; the safety ring is not pressed at all, and so on.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: