Each part of the anticorrosive filler material properties

by:NEWLINE     2020-08-03
2019 - anticorrosive filling machine parts material characteristics 07 - 04 10:58:34 anticorrosive filling machine the whole machine adopts SUS304 stainless steel, teflon PTFE filling gun, pipe and valve adopts the UPVC material, weighing platform use PVC roller PP panel design. Below small make up for you body every part introduced the structure of material characteristics, let you choose anti-corrosion class filling machine have a good understanding. The fuselage of SUS304 stainless steel SUS304 is simple 304 stainless steel. SUS is Japan material standard, according to the ASTM standard is 304 stainless steel made a number of stainless steel. 06 cr19ni10 (equivalent to our country's 304 0Cr18Ni9) Stainless steel, Japan also cited the name in the United States, called: SUS304. 304 stainless steel with good heat resistance, and is widely used in making corrosion-resistant and formability of equipment and parts. So the anti-corrosion liquid filling adopts SUS304 stainless steel, can improve the anticorrosion properties of the fuselage. Teflon is PTFE Polytetrafluoroethene, English abbreviation for PTFE. Teflon features are not sticky, heat resistance, slip resistance, resistance to wet, wear resistance, corrosion resistance. In atomic energy, defence, aerospace, electronics, electrical, chemical, machinery, instruments, meters, construction, textile, metal surface treatment, pharmaceutical, medical, food, metallurgical smelting and other industries widely used for high and low temperature resistance, corrosion resistant materials, insulation materials, anti-sticking coating, etc. , make it become the irreplaceable products. We are fully considered when filling acid alkali materials. To fill the gun is the part most exposed to acid alkali, using teflon filling gun design, greatly enhance the anti-corrosion performance of the filler filling process. UPVC is also called the hard PVC, it is made by the polymerization of vinyl chloride monomer and amorphous thermoplastic resin with certain additives ( Such as stabilizer, lubricant, filler, etc. ) Composition. UPVC have strong corrosion resistance, small flow resistance, The lining is very smooth. The surface roughness coefficient is only 0. 009, fluid resistance is small, not too much lower water pressure. ) , high mechanical strength, health, non-toxic, good water tightness ( UPVC material produced by the pipe use will not have significantly decreased after many years, no leaking apprehension of aging. ) The function such as characteristics. Because of UPVC has many features, we design our r&d personnel in considering the pipe and valve anti-corrosion filling machine is a filling liquid transmission link, so the filler pipe and valve adopts the UPVC material, effectively improve the filling machine of use fixed number of year and filling precision. Polypropylene ( PP) Is in the common plastic lighter, its performance is excellent, can be applied as a high frequency insulation resistance to hot and humid. Effective plays in the process of filling machine filling antistatic corrosion. PVC roller bearing capacity, simple structure, high reliability, convenient in operation and maintenance, to facilitate our usual maintenance of filling machine. So every part anticorrosive filling machine structure make full use of the material properties. Makes the anti-corrosion operation safety, anticorrosive performance of the filling machine, filling accuracy and filling speed is higher.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: