Filling machine equipment safety operation procedures

by:NEWLINE     2020-08-21
2019 - filling machine equipment safety operation procedures 07 - 02 12:45:45 mechanized farming production increased our enterprise's production efficiency, increase the scale of production at the same time. We also cannot ignore the importance of safe operation in the process of production operation, many of the news reports of plant explosion had to let us reflect on events such as fire casualties, the importance of safe operation. Today small charged comb for everyone under filling machine safety operation procedures. One, the basic parameters: 1, the inspection before use: the machine is installed, connected to the power supply, commissioning three-phase motor, ensure the running in the right direction, to ensure that the pressure and flow of compressed air, check the motor, bearings, such as whether to need to add lubricant, it is strictly prohibited without oil, normal rear can start the machine, observe each part fasteners for loose at the same time, for each part is in stable condition after the operation, can the normal use; 2, check the safety facilities function is normal; 3, carefully before starting to check whether there is water, all water tank chain plate or jammed, conveyor belt whether there is sundry, chu cover if there is a cap in the oven, water, electricity, gas is a few barrels, after being all play ah you ready, in close the main power supply, the power indicator light is lit, failure indicator, stop light is not bright, and the starting condition, press the start button on the control box and filling the start switch, after three buzzer warning, the machine is up and running, into the wash, washing, filling automatic works, downtime can be in in filling and press the stop button control box, and down to turn off the main power supply. Second, the safety conditions of use: 1, filling machine equipment no foreign bodies ( Such as tools, rags, etc. ) ; 2, filling machine, there is no abnormal noise ( If there are any should immediately stop, check the reasons) ; 3, all the protection content should be safe, reliable, it is forbidden to wear on the foreign body could be moving parts ( Such as scarves, bracelets, watches, etc. ) ; 4, long hair, the operator should take hair mask. 5, water and other liquids don't cleaning electric unit; 6, when cleaning should wear overalls, gloves, eyes wide, strong acid, strong alkali corrosion prevention; 7, and its runtime, someone must monitor, do not use tools or other objects close to the machine; 8, don't conceded oh irrelevant people close to the equipment operation. Three, maintenance and maintenance: 1, the regular inspection and maintenance: should a month to start components such as cylinder, solenoid valve, speed regulation and electric parts for inspection. Can be adjusted by manual inspection method to check the quality and reliability, cylinder mainly check whether leakage and card lag phenomenon, electromagnetic valve can be manually forced action to IP segment is electromagnetic coil burned and the valve plug, electrical parts may be a control input and output signal lamp to test, such as check whether the switch element is damaged, the line is break line, an output device is working correctly. 2, daily build and maintenance: whether the motor run normally, security environment is normal, the cooling system. The existence of abnormal vibration, abnormal sound; Whether the abnormal heat, color change. Four, matters needing attention: 1, must put motor, chassis grounding, and zero line and the bottom line to separate; 2, the machine power supply into line subject to leakage switch introduced; 3, pneumatic components for pneumatic special lubricating oil, in order to prolong the service life of cylinder; 4, water mercury is prohibited without water operation, in the process of running attention to alkali, disinfection, water tank, water supplement and ensure the supply of clean water; Five, equipment cleaning requirements: 1, before going to work every day, after work on the equipment of the nozzle, pipelines, conveyor belt, tank cleaning; 2, a week regularly for filling equipment and pipeline use disinfectant for cleaning, disinfection and then use of devices for process water flushing; 3, the operator disinfection cleaning process should be recorded and saved. Filling machine should be in strict accordance with the above safety operating rules for safe operation and maintenance, reduced our accidents to a minimum. Improve production safety and production efficiency of the factory.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: