How to operate the system of aluminum foil cover machine equipment?

by:NEWLINE     2020-08-28
How to operate the system of aluminum foil cover machine equipment? 2019 - 04 - 19 09:50:04 aluminum foil cover machine adopts man-machine surface touch, as long as according to the instructions on the screen, without any experience, can be easily online, greatly shorten the training time, can be arbitrary set production speed, can automatically adjust the production speed, can cooperate with any production line speed for effective operations. The use and operation 1 machine, aluminum foil cover in front of the boot, shall check the disinfection liquid level; The power, air pressure is normal; Using the manual method to check all the electromagnetic valve, cylinder are in good condition; The action is normal; Every pump steering is correct; Air or exhaust. If found abnormal situation, to troubleshoot the rear can carry on production. 2, aluminum foil cover machine production system, automatically washing, disinfection, filling, cover, gland, without human disturbance, but operators to closely observe state of each part, found the problem, in a timely manner will automatically to manual, in order to prevent accidents. When chain position is wrong, in manual mode will be the main shaft, then push the chain to normal location. Work should be timely supplement disinfectant to prevent pump in the anhydrous state idling, burn out seal. 3, aluminum foil cover after the machine production, should put off residual liquid pipeline, road and water cut off gas, shut off the power. Daily maintenance 1, we must check some parts, check regularly. Inspection area are: worm gear, worm, lubrication on the bolt, bearings and other activities, to see if these parts flexible rotation and wear situation, found that defects should be timely repair, shall not be used. 2 machine, aluminum foil cover should be choose dry clean indoor use, try not to in the atmosphere contain acids and other places on the body of corrosive gas circulation use. 3, the aluminum foil machine should be cleaned and then set up after using, prepare for next time use. 4, if the roller in the work before and after the move, please adjust front bearing single screw on to the appropriate location. If the gear shaft moving, please adjustment bracket screw back to the appropriate location and adjust the clearance to the bearing noise does not occur, hand turn pulley elastic appropriate advisable, too tight or too loose all can make the machine may be damaged. 5, if not for a long time to use packaging machine equipment, must clean the aluminum foil machine at the whole body, parts of smooth surface coated with anti-rust oil, cloth canopy hood. If is not for a long time to use the equipment, before use to check whether the parts normally to boot.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: