Maintenance and maintenance of bottled water production line
Maintenance and maintenance of the bottled water production line 2018-12-06 09:12 The bottled water production line mainly produces bottled water directly and automatically through the production equipment of bottled water. In this way, even if the plant is not large enough or other financial backing is not strong enough, the work efficiency can still be high, because the entire barreled water production line only needs to operate staff and only two, complete electromechanical automation equipment. It is precisely because there are very few operators required daily, so online maintenance must be done to ensure that the equipment can be effectively and continuously produced. First, do not modify the PLC program by yourself. This data has been debugged when the manufacturer produces it. Modifying it yourself will make the system disorder and cause it to not work normally. Second, these parts on the gas circuit should be drained after a period of time to ensure the service life of the cylinder. The main thing is that by adjusting the position of the screw, the device will be waterproof by itself. Fourth, adjust the throttle valve. Sometimes although the manufacturer has already adjusted it, you need to read the instructions at this time. If the throttle valve is in the normal position, you don't need to adjust it yourself. At the same time, ensure that the air pressure must be normal before work, so that it will not affect the subsequent work. Fifth, when the production equipment is stopped, be sure to turn off the power switch first to prevent water from entering the electric control box. save resources. Sixth, the equipment of this machine should be in good contact with the ground, so as to ensure the safety of operation. It is also necessary to regularly add lubricating oil to the gears to ensure the normal operation of mechanical equipment. Seventh, the tightness of the mechanical chain will change once due to long-term uninterrupted operation, so it is necessary to adjust the tightness regularly to prevent the chain from knotting or breaking.