Maintenance method of beverage filling machine parts
Maintain the method of beverage filling machine parts in order to improve the production efficiency of beverage filling machine, ensure no fault in the process of using parts, this needs us to do a good job of maintenance, let's look at the maintenance method of beverage filling machine parts.
1, beverage filling machine, you must turn the machine by shaking the handle before driving, check whether the rotation has a different shape, to determine the normal driving again.
2, adjust the machine tool to use proper, it is forbidden to use too much tools or too hard to demolish parts to avoid damage to parts or affect machine performance.
3, beverage filling machine is adjusted, must will loose the screw tight good, turn the machine by shaking the handle look after its action is in accordance with the requirements, can drive a car.
4, check the speed throttle valve and the filling interval throttle valve is closed, throttle valve cannot be closed.
5, check the fast loading a foreign body inside the 3-way valve, if you have to immediately arrangement;
See under fast loading the 3-way valve and filling head of air is there inside the hose, if there is air, will be cut or eliminate air as far as possible.
6, see all of the sealing ring is damaged, if have damaged, please replace the new one.
7, to see if there are any more card filling nozzle valve core plug surface open or delay, if there is any card, want to install the valve core from the good position.
Such as delay to open, it is necessary to regulate the thin cylinder throttle valve.
8, the inspection of beverage filling machine filling velocity is too fast, throttle valve, adjust the filling speed by filling speed.
If you want to know more information about the filling machine, please pay attention to our website hope the above information will be helpful to you back: filling machine enterprises to grasp the future market development direction on the next page: beverage filling machinery common problems