Measures for troubleshooting of beverage machinery
The three-in-one filling machine is a combined multi-functional unit integrating washing, filling and sealing. It is currently one of the domestic small and medium-sized beverage machinery and equipment with ideal performance. So when this series of beverage machinery fails, how can we solve it? 1. Inaccurate filling volume: When filling large-size products, the feeding trough is insufficient to make the liquid level unstable. You can increase the feeding amount or re-close the ball valve above the filling head to reset the filling time, lengthen the filling time, and slow down Filling speed to solve. 2. After adjusting the digital dial code or unit, the time does not change, then turn off the power and reconnect the power. 3. The liquid level is stable and the filling volume is not accurate: There is debris blocking the filling channel of the beverage machine, mainly at the entrance of the trough or in the filling nozzle, check and clean it up. 4. There is a drip after closing: 1. The orifice of the filling nozzle is damaged, the filling nozzle can be removed to trim the orifice, and the diameter of the orifice cannot be greater than 7.5mm. After repairing the aperture, gently smooth the surface of the orifice on the water scrubbing paper. 2. The ball valve in the filling head is damaged and needs to be replaced. 5. No filling after touching the filling switch, the time relay digital indicating LED does not flash: The filling switch of the beverage machine is damaged or the time relay base is loose. Replace the filling switch of the same model or press the time relay base tightly. 6. After touching the filling switch, the digital LED indicator of the time relay flashes, but no filling: First check whether there is air pressure or whether the air pressure is too low, or it may be that the solenoid valve coil of the beverage machine is damaged or the pneumatic valve core is stuck by stolen goods, you can unplug the power, open the board, use the object to rotate or press the corresponding solenoid valve coil If the valve can change direction, it means the solenoid valve coil is damaged. If it cannot change direction, the valve core is stuck. You can replace the solenoid valve coil or disassemble the valve for repair.