Precautions for the operation of beverage machinery

by:NEWLINE     2021-04-28
Precautions for the operation of beverage machinery2018-03-22 13:13 Nowadays, beverage machinery has swept the entire Asian market, but the losses caused by improper use in the process have brought great losses to many beverage manufacturers. Let's analyze the hazards caused by improper use of the liquid filling machine: 1. Do not flush directly with water when disassembling and washing the beverage machine. If you use water pipes, water guns and other instruments to flush the machine, if the water source enters the machine, it is likely to cause the machine to deteriorate faster, weaken its performance, and easily crash. If there is a need to clean the beverage filling machine, the remaining products in the machine should be removed, and then the tank should be filled with gentle cleaning fluid. It is recommended to use warm water, if necessary, use soapy water, alcohol and other cleaning fluids. 2. If the injection nozzle overflows, press the safety emergency stop switch, and after the beverage machine stops, take out the injection nozzle to check if there is any damage. If damaged, the injection nozzle can be replaced. Avoid wasting materials and ensure that the workshop is tidy. 3. When the cylinder is ejected and cannot be returned due to improper operation, do not press the safety button recklessly. When the machine cylinder is ejected and cannot be returned, the production should be suspended for 1-2 minutes to check whether the machine malfunctions or crashes. If the beverage machine fails during production, the staff presses the emergency stop switch. It may cause chaos inside the machine, clear all the previous settings. Will delay production efficiency. Equipment maintenance of the liquid filling machine: 1. The body of the beverage filling machine is made of stainless steel. Do not scrape its surface with sharp or hard objects; 2. When removing and washing the piston, remove the fixing screws at the same time to avoid disassembly. One affects the process requirements of the other; 3. The cylinder of the beverage machine has been lubricated before leaving the factory, please do not open or add any lubricating oil; pay attention to its maintenance after the beverage machine is used, in the piston type Before the filling machine is cleaned, the remaining product should be cleaned up, and then the material bucket should be filled with gentle cleaning liquid. The cylinder has been lubricated before leaving the factory. Please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and hygienic. Power off when it is not working. In addition, while maintaining and using the beverage machinery correctly, inspections and debugging must be carried out regularly. Only in this way can the beverage equipment work healthily and stably.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: