What is water treatment equipment? 2019-01-19 16:59 The RO-reverse osmosis pretreatment process produced by Niulan Beverage Machinery is mainly activated carbon and fine filtration. Osmosis is a natural phenomenon: water passes through a semi-permeable membrane, from the low solute concentration side to the high solute concentration side, until the solvent chemical potential reaches equilibrium. At equilibrium, the pressure difference on both sides of the membrane is equal to the osmotic pressure. This is the Osmosis phenomenon. Reverse osmosis means that if the pressure is applied on the side of high concentration, the above-mentioned osmotic effect can be stopped and reversed, so that the water will be forced from the high concentration to the low concentration side to purify the water. This phenomenon is called reverse osmosis (reverse osmosis), and this semi-permeable membrane is called reverse osmosis membrane. The working principle of water treatment equipment: Any substance has its own inherent frequency. Scale is an inorganic salt. Generally, the casing of equipment is made of metal materials, and the oscillation frequency of scale and metal materials is different. The high-frequency oscillating wave released by the SLGP electronic water treatment instrument resonates with the scale attached to the surface of the metal material, that is, crushing and peeling, from the surface to the inside, cyclically, so as to achieve the effect of descaling. At the same time, when water flows through high-pressure and high-frequency electromagnetic fields, the calcium, magnesium ions and bicarbonate ions in the bicarbonate in the water will lose their chemical, physical properties and mutual attraction under the action of high-pressure and high-frequency electromagnetic fields. The ability to gradually form a cluster of crystals sinking to the bottom, and discharged with the sewage, so as to achieve the purpose of anti-fouling. The water treatment equipment is used in the beverage machinery after the reverse osmosis system. It uses the electrodes at both ends of the module to move the charged ions in the water, and cooperates with the ion exchange resin and selective resin membrane to accelerate the removal of ions, thereby achieving water purification. , The resistivity of produced water can reach 15-18M. The hydrogen radicals and oxyhydrogen radicals required for the regeneration of ion exchange resins come from high-voltage electricity and are supplied by the dissociation of water, so that there is no need to use acids and alkalis for regeneration and reduction.